Semi-Automatic Cold Saw with Ferrous Head- 220V 3 Ph

Semi-automatic ferrous saw that’s user friendly for set up and operation. Featuring two removable surface wear plates, heads that rotate 45 and 90 left/right, three gib guides, a manual oiler, and a self-adjusting, metal chip brush.
Features:

• Head rotates 45 right of center for miter cutting and up to 90 left of center for miter cutting and slotting
• Outboard section of the table is designed so shorter lengths tumble down a mesh discharge chute
• Manual oiler to lubricate 1″ thick, hardened vertical ways
• 3.5/4.5 HP motor has the muscle to drive a 14-1/2″ or 12″ blade quickly and quietly through solids
• Clear acrylic hood has shock assists for raising and lowering and electrical interlocks
• Table features two removable surface wear plates to support longer cut lengths
• Three gib guides for the cutting head with two adjustable cast iron gib blocks in each for increased cutting accuracy and easy adjustment
• Rear surface of the gearbox is machined with interlocking circles to evenly distribute oil over the ways
• Large automatic clamping vise features adjustable gib guides, removable face plates, and an anti-burr arm
• Self-adjusting, metal chip brush fills removable chip drawer
• Ability to add a programmable feed system to make fully automatic with wide range of capabilities
• Swap cutting head to gain non-ferrous/ferrous option on same saw

Specifications:

• Voltage: 220 V
• Horsepower: 3.5/4.5
• Cutting Ability: Ferrous / Non-Ferrous / Plastic
• Maximum Blade Diameter: 14-1/2
• Maximum Vise Opening: 8-3/4
• Maximum Feed Vise Opening: n/a
• Maximum Angle: 45 / 90 left / right
• Slotting: Yes
• Phase: 3
• Speeds: 25/50 rpm
• Weight: 1,360 lbs
• Solid Round 90 Capacity: 4-1/4
• Solid Round 45 Capacity: 3-5/8
• Tube 90 Capacity: 5-1/16
• Tube 45 Capacity: 5
• Square 90 Capacity: 4-1/4
• Square 45 Capacity: 3-7/8
• Rectangle 90 Capacity: 4 x 7
• Rectangle 45 Capacity: 4 x 6
• Work Height: 35
• Height: 73
• Width: 28
• Depth: 39
• 440V model requires step-down transformer for operation (part number: 300674) Sold Separately

What’s Included:

• Blade
• Coolant
• Saw blade selector calculator
• Tools kit for changing blades
• Instruction and service manual
• Adjustable positive stop

Shipping / Billing Information

This product ships direct from the manufacturer:

• Your order will ship in approximately 7-21 business days.
• This product is considered special order. Your account will be charged when you place your order.
• Express or overnight shipping is not available for this product.
• Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.
• Liftgate and Residential Delivery is covered with the excess weight fee, and the freight company will call the day before delivery to set up a time at no charge to you.

Return Information

Laguna does not accept returns. If your shipment was damaged, please refuse delivery, for defective items, please contact Woodcraft Supply customer service @ 1-800-535-4482.

Warranty Information

New woodworking machines sold by Laguna Tools carry a two-year warranty effective from the date of shipping. Laguna bandsaw blades’ welds are backed by their 1-yr manufacturer’s warranty. Machines sold through dealers must be registered with Laguna Tools within 30 days of purchase to be covered by this warranty. Laguna Tools guarantees all new machine sold to be free of manufacturers defective workmanship, parts and materials. Laguna Tools will repair or replace, without charge, any parts determined by Laguna Tools, Inc. to be a manufacturers defect. They require that the defective item/part be returned to Laguna Tools with the complaint. In the event the item/part is determined to be damaged due to lack of maintenance, cleaning or misuse/abuse, the customer will be responsible for the cost to replace the item/part, plus all related shipping charges.

For warranty repair information, call 1-800-332-4094.