PDF Pattern – The Glacier Bag Bundle (2 patterns3 Bags)

NOTE: This is a PDF pattern for adownloadable set of English instructions.

This Glacier Bag Bundle includes 2 complete patterns that will make 3 bags in total. Be sure to scroll to the bottom to find the compete sew-along You-tube videos! Please note: this pattern includes instruction for some “seam binding” to finish inside seams with fold-over elastic. You can watch the videos to see how easy this is to do!

The Glacier Crossbody Bag, is a triple zipper compartment bag thatfeatures an additional vertical zip pocket in the front, as well as a creditcard pocket & lipstick pocket in one of the outer compartments. It has along adjustable strap that extends to 61 (155 cm) long.

TheGlacier Base Bags pattern is an intermediate level version of the moreadvanced Glacier Crossbody Bag*. The mini is made from the outer pocketsof the Glacier Crossbody, and the large is made using the main compartment.Both have a long strap that extends to 61 (155 cm) long, and a paddedcompartment. The large size, which is the quicker make of the two, featuresan outer slip pocket with a flap closure that snaps shut, and the mini featuresa vertical zipper pocket. *The Glacier Crossbody Bag is a stand-alone patternthat incorporates the mini and large into one pattern, and is included in thispattern bundle.

The fabric on the covers of these patterns is a Stonehenge Ombre by Northcott,which was generously provided by www.purplekatzquilting.com. The Zippers-by-the-Yard in this project are found here at emmalinebags.com

Get the hardware kit!

Glacier Crossbody Bag Finished Size:

• Width at base– 12 1/2 (32 cm) Height– 12 1/2 (32 cm) Overall Depth– 6 (15 cm)

GlacierBaseBags Finished Sizes:

• Mini: Width at base– 10 (25.4 cm) Height– 10 (24.5 cm) Depth– 2 1/2 (6.35 cm)
• Large: Width at base– 12 1/2 (32 cm) Height– 12 1/2 (32 cm) Depth– 2 1/2 (6.35 cm)

This pattern suits an experienced intermediate to advanced bag maker.

The pattern includes colour digital drawingsand full size pattern pieces that include seam allowances for pattern pieces that are not simple rectangles. Cuttinginstructions are provided for you to use a rotary cutter, ruler and mat to cut rectangular pieces. Pattern instructions are in both imperial and metric measurements.

MATERIALS:

Yardages are approximate and based on 44 (112 cm) fabric. Less fabric will be required for wider widths of fabric.

Glacier CrossbodyBag:

Fabric & Interfacing:

• 1 yd./1 m.Exterior Fabric (quilting cotton, light canvas/duck, dcor cotton, cork, vinyl)
• 1 3/4 yd./1.75 m.Lining Fabric (quilting cotton or similar weight woven fabric)
• 3 yd./3 m. Fusible Interfacing (20/51 cm wide)– Light-med weight fusible woven: Pellon Shapeflex SF101
• 1/2 yd./0.5 mFusible Fleece (46/117 cm wide)– Dense needled fleece: Pellon Thermolam Plus Fusible TP971
• 18 x 36 (45 cm x 91 cm) Foam Stabilizer such as By Annies Soft & Stable, Bosal-in-R-Foam, or Pellon FlexFoam

Zippers:

• 50 (127 cm) of #5 Nylon Coil Zipper-by-the-Yard

OR:

• (2) Zippers 14 (35 cm) #5 Nylon Coil Zippers that will be cut down to 12 1/2 (31.75 cm) each
• (1) Zipper 16 (41 cm) #5 Nylon Coil Zippers that will be cut down to 15 (38 cm)
• (1) Zipper 10 (25 cm) #5 Nylon Coil Zippers that will be cut down to 9 (23 cm)

Bag Hardware & Supplies: Get the hardware kit!

• (2) 3/4 (18 mm) Rectangular Rings
• (1) 3/4 (18 mm) Adjustable Strap Slider
• (8) Small Double Cap Rivets (Optional) or appropriate size to match your material thickness.
• 2 1/2 yd./2.5 m – 3/4 (20 mm) Fold-Over Elastic. Note: Self-made bias binding can be used instead by cutting 2 1/4 (6 cm) bias cut strips.

Glacier BaseBags:

MINI SIZE: Fabric & Interfacing:

• 3/4 yd./0.75 m Exterior Fabric (quilting cotton, light canvas/duck, dcor cotton, cork, vinyl)
• 3/4 yd./0.75 m Lining Fabric (quilting cotton or similar weight woven fabric)
• 2 yd./2 m Fusible Interfacing (20/51 cm wide) – Light-med weight fusible woven: Pellon Shapeflex SF101
• 1/4 yd./0.25 m Fusible Fleece (46/117 cm wide) – Dense needled fleece: Pellon Thermolam Plus Fusible TP971
• 18 x 36 (45 cm x 91 cm) Foam Stabilizer such as By Annies Soft & Stable, Bosal-in-R-Foam, or Pellon FlexFoam
• 2 yd./2 m – 3/4 (20 mm) Fold-Over Elastic. Note: Self-made bias binding can be used instead by cutting 2 1/4 (6 cm) bias cut strips.

Zippers: (1) Zippers 14 (35 cm) #5 Nylon Coil Zipper that will be cut down to 12 1/2 (31.75 cm)

(1) Zipper 10 (25 cm) #5 Nylon Coil Zippers that will be cut down to 9 (23 cm)

LARGE SIZE: Fabric & Interfacing:

• 1 yd./1 m Exterior Fabric (quilting cotton, light canvas/duck, dcor cotton, cork, vinyl)
• 1/2 yd./0.5 m Lining Fabric (quilting cotton or similar weight woven fabric)
• 2 yd./2 m Fusible Interfacing (20/51 cm wide) – Light-med weight fusible woven: Pellon Shapeflex SF101
• 1/4 yd./0.25 m Fusible Fleece (46/117 cm wide) – Dense needled fleece: Pellon Thermolam Plus Fusible TP971
• 18 x 36 (45 cm x 91 cm) Foam Stabilizer such as By Annies Soft & Stable, Bosal-in-R-Foam, or Pellon FlexFoam
• 2 1/2 yd./2.5 m – 3/4 (20 mm) Fold-Over Elastic. We like the By Annies brand, sold on our website or byannie.com in 2 yard packs. Note: Self-made bias binding can be used instead by cutting 2 1/4 (6 cm) bias cut strips.

Zipper: (1) Zipper 16 (41 cm) #5 Nylon Coil Zipper that will be cut down to 15 (38 cm)

Bag Hardware & Supplies (BOTH SIZES):

• (2) 3/4 (18 mm) Rectangular Rings
• (1) 3/4 (18 mm) Adjustable Strap Slider
• (1) 9/16 (14 mm) Magnetic Snap (for LARGE size only)
• (8) Small Double Cap Rivets (Optional) or appropriate size to match your material thickness.