Brisa NESSMUK 125 Blade Blank

Brisa Knives of Finland Blade Blank

Model-NESSMUK 125

The BrisaNESSMUK 125 is aknife blade to be used for bushcrafting, camping and skinning. One of the best all around outdoors blades.

Blade length- 4.9″

Blade Width- 1″

Blade Thickness- 0.15″

OverallLength- 9.25″

Finish– The Nessmuk blades still have the scale/decarb on themfrom heat treat which gives the bladea dark, rustic look.

Tang hole diameters– 3/16″ (these will fit our 1/4″ Corby Bolts perfectly. If you plan to use 3/16″ pins you will likely need to run a 3/16″ drill bit through the holes to clean them up enough for the pins to fit cleanly through). 1x 1/4″ lanyard tube hole.

Steel Type-80CrV2 (HRC 58-59). This steel has very high wear resistance, high corrosion resistance with very good toughness.

Condition- These blades are ground, heat treated, sharpened and etched with the Brisa logo.

Brisa Knives of Finland is well known around the world fortheir quality and craftsmanship. After frequentlybeing asked by our customers if we could begin carrying blade blanks, we wanted to be able to offer a productthat would truly reflect a premiumlevel of quality. There’s an infinite selection of cheap, low quality knife blanks on the market today and when you finish one of those you still have a cheap low quality blade with a nice custom handle on it. With these Brisa blades, once youare finished you will have a premium high quality knifeworthy of the time and effort put in to finishing it with your own custom handle.